Jump to content
Damien Symonds

SXE-12

Sign in to follow this  

Recommended Posts

< Go back to the previous step    << Go back to the beginning

All the important settings

Make sure your screen looks exactly like mine:

hub.png

  1. The White Point should be 6500K, unless you found out that your lab recommends something different.  If so, choose your lab's setting, but consider finding a new lab very quickly.
  2. Choose "Measured Mode" then type "80" in the White Luminance field.  This will be the brightness of your screen.
  3. The Gray Balance setting will be on "Faster" by default, but let's go for the best possible calibration we can.  Choose "Better" here.
  4. We're about to do a full calibration, so of course choose "FullCAL" here.

The default setting of Gamma 2.2 is always correct, no matter what out-of-date information you might have read about Macs using 1.8.  "Room Light Compensation" must always be off, and the "Backlight" should be what you chose on a previous screen.

Once all of those settings are input, press "Next" to begin the calibration process.

Let's calibrate! >>

Share this post


Link to post

Yes. I see where I went wrong.  The room light analysis screen changed the settings because I chose "accept recommended settings" instead of "keep the setting you selected"

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
×
×
  • Create New...