Danelle

Yes a little. I wasn't sure if it was ok to be over 7000 and the graph not starting at 0?

Prints are close, maybe a touch warmer which I haven't liked. They tend to print with a bit more red in skin tones.  Is the graph OK and settings OK even though it is over 6500?

Much closer now. I got to adjust the colors all to 50 by selecting User Defined. I was able to get the brightness correct at exactly 100. Attached are the results. Still a little high on the white point. Also noticed the color line chart Isn't starting at zero. Any suggestions?

I dont have options to adjust colors in my monitors settings. Under the color settings the Red Green Blue options are not selectable. I can only adjust the temperature. Should I adjust brightness thru the AMD Graphic Card control center?

The brightness is set to zero but the measured white luminance is at 226. See attached screenshot

Ok. Calibrating at 6500 now. 

Ok should I go back to 5000k with gamma on?

These are at 5000k one showing WP of gamma on and one showing gamma off. 

Working on this again. Should the gamma setting on the monitor be on or off?

My computer teacher friend was helping me. I don't have those numbers. I would have to do that part again.  I see some figures written down all in the 6000s but I would need to do that again to give them to you. Sorry

I'm not sure what you mean? , my temp options are 5000,6500, 7500, 8200, 9300, 11500, and sRGB. I just turned the brightness all the way down and my photos are extremely dark in Lightroom prior to calibrating. I'm getting nervous because I wanted this all taken care of prior to my first wedding of the year this Friday. Overall, I think it was ok prior to messing with it, just prints were a little darker. I think I might have made things worse, but I did reset to previous or close to anyways.

I'm really struggling. It seems like such an easy process but the outcome is way off. 

Yes

It is a DS270 Yamakasi monitor. I have been working on this all day. ? Still no luck. My numbers came in ok on the last calibration but colors completely off. I have setting it to white led and tried both native and 65. I'm not real good to it's all this but have been reading a lot. The specs on this was suppose to close to a Mac monitor. Let me see if I can find it exactly in a link.

Led backlight and ips if that helps.

Yamakasi

When setting the brightness on my monitor, I could only get it 189 instead of 100 with turning the brightness all the way down. It's looks terrible. Very dark and red. Where it should be black, it's redish and very cloudy. What should the temp be set to? Do my numbers look ok? I put it as a white led but it's a different brand of screen. It's led backlight and ips. It was expensive but foreign. Any help is appreciated.

My monitor will not go low enough  for brightness adjustment. The target white luminance is 100 and with my brightness turned all the way down I am still high. My measured luminance was 189 with brightness all the way down. Here are screen shots of my graphs. I have literally redone this 10 times now.