ElenaB Posted January 4, 2018 Posted January 4, 2018 Hello I was able to remove/clean other parts of the jacket but his sleeve is turning to be a challenge. Tried patch, clone and stamp but i dont like the result. Can i please get some help or guidance on how best to clean that area? Thank you pic1...i got that far and didnt like how it started to look Pic2..i like until that point Pic3.. whole jacket clean up unril Pic2 Pic4 ....original
Damien Symonds Posted January 4, 2018 Posted January 4, 2018 Can you try this Channel Mixer layer? Red 0, 0, +48, +3 Green 0, 0, +72, 0 Blue 0, 0, +98, 0 If you'd asked me before you started, I would have advised adding that layer to the entire jacket. Now that you've already done some repairs, I'm not so sure. Just apply it to the troublesome sleeve for now.
ElenaB Posted January 4, 2018 Author Posted January 4, 2018 Thank you, I tried on ACR photo and got moire on some parts of the jacket but only a little of the dirt got cleaned with your Channel Mixer recommendations. Also, i have never used or learned about this adjustment, so had to do some reading on the fly. I turned opacity of the layer to 27 bc the blue was dark grayish blue w those numbers.
Damien Symonds Posted January 4, 2018 Posted January 4, 2018 No, the colour should have been exact. Check the numbers again.
ElenaB Posted January 4, 2018 Author Posted January 4, 2018 this is what i get with the numbers. i inverted the mask and painted on the places i need the dust gone but it looks really off
ElenaB Posted January 5, 2018 Author Posted January 5, 2018 I think I got somewhere where I am happy medium with. Did a clone from other sleeve bc i was loosing texture and then mask, invert and painted with low opacity. still doing it but much happy with the result
Damien Symonds Posted January 5, 2018 Posted January 5, 2018 1 hour ago, ElenaB said: this is what i get with the numbers. i inverted the mask and painted on the places i need the dust gone but it looks really off Did you treble-check my numbers? To make sure you've got them exactly right?
ElenaB Posted January 5, 2018 Author Posted January 5, 2018 yes, i just did and image still has that blue/gray tint do you want me to post screen on the channels? Thank you for helping :-)
ElenaB Posted January 5, 2018 Author Posted January 5, 2018 4 minutes ago, ElenaB said: yes, i just did and image still has that blue/gray tint do you want me to post screen on the channels? Thank you for helping :-) What do you think about this? No, i have no used channel mixer but wanted the image done today. I am aiming to soon get into your levels class and am so cheeky to get in there
Damien Symonds Posted January 5, 2018 Posted January 5, 2018 7 minutes ago, ElenaB said: yes, i just did and image still has that blue/gray tint Yes, that's right, it's supposed to. Then you invert the mask and paint on the sleeve, exactly as you said. When I did it, the numbers were perfect. An exact match for the jacket colour. 1
ElenaB Posted January 5, 2018 Author Posted January 5, 2018 Damien, thank you so very much! It is perfect!
ElenaB Posted January 5, 2018 Author Posted January 5, 2018 I started clean from ACR and applied the Channel Mixer settings you gave me. Painted on the jacket sleeve and a little on the shoulder and a crease. Then cloned a couple of dirty spots bc moire was stronger on those. Thank you very much for your help. Cant wait to graduate from Raw and take your levels class. 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now