Calibration & Test Prints-February

[Damien Symonds]

So what's our percentage here?  For how many prints is the screen NOT too cool, compared to how many for which it is?

[Damien Symonds]

If we can get a feel for the percentage, we can make a decision about what to do with the calibration.  If it's about 50/50, you might decide to recalibrate the screen a bit warmer, so it's about halfway between the two lots of prints.  Whereas if it's more like 75% screen-to-print match, and only 25% where the screen is a little too cool, you might decide to recalibrate the screen only a tiny bit warmer.

[Sarah Neese]

Out of 6 prints that I am using to compare, 4 are not cool. 

[Sarah Neese]

I've gone back and recalibrated and the prints are slightly warmer...so slightly and you notice it more in the neutrals.  

[Sarah Neese]

I am sooooooclose.....Brightness is right on, prints are ever so slightly warmer, I notice the warmth more in the neutrals.  

[Damien Symonds]

It sounds like you're as close as you're going to get.

From now on, just monitor it as you get new sets of prints.

[Sarah Neese]

ok, thank you!  I definitely will.  I've been playing with tiny changes in the calibration and its still as it was but it is 100% different than last night!  Thank you again so much! 

 

[Damien Symonds]

You're welcome.

Have you read through the Bridge Class yet?

[Sarah Neese]

I'm actually working on it.  Started it this past weekend.