SX2E-19

[Damien Symonds]

< Go back to the previous step    << Go back to the beginning

Brightness not right

Please never underestimate the impact your surrounding light has on this calibration/comparison process. If your light is too dim (which is a very common problem) it will always make your prints seem darker than they really are, and cause you to think that your screen is too bright.

If you think, or even suspect, that your light is the culprit, take steps to rectify it. Get brighter bulbs if you can, or at least try assessing your prints in daylight. I would hate to be wasting your time with all of these calibration adjustments if the calibration wasn’t actually the problem.

If you’re sure the light is ok, read on …

Let’s try again.

At the top of the screen hit "4. Settings" ...

... to come back to this screen:

We're here to choose a different brightness target from this menu:

What setting to choose

• If your screen is too dark, choose a higher number.
• If your screen is too bright, choose a lower number.
• If a lower number isn't available, choose "Other" then type your own:

Note: If you find you need to go lower than 70, please, I beg you, consider the light that you’re in. 70 should be as low as you ever need to go if your light is good.  If it's not low enough for you, your room light is too dim.

Once you’ve chosen your new target, press “Next“ and continue with the new calibration.

Follow the instructions again >>