SX2D-11

[Damien Symonds]

< Go back to the previous step    << Go back to the beginning

Lights out

At this point, if you haven’t already, turn off the lights or pull the blinds, or whatever. You don’t need your calibration compromised by light sneaking in, so for your safest result, make your room as dark as possible.

Place the Spyder

Lengthen the cord, unclip the cover, then position the device as instructed:

It's really important that the device is sitting flush against the screen surface.  This prevents light leak.  So it's best if you can tilt your screen back a bit to ensure it sits easily.  (Unfortunately my setup doesn't allow tilting, so I have to hold it there like a numpty.)

Press "Continue".

Adjustments >>