Perli halpern Posted August 21, 2017 Posted August 21, 2017 Hi Thank you so much for your tutorial on calibrating - I am trying to following the tutorial for the x-rite iprofiler. My results were brighter n more pink skin tones compared to print which is more dull and beige colour skin tones so I restarted from step six reducing temp I.e making it cooler as well as less bright but I don't see a difference in the pinks skin tones.... please can you advise!! Side note, could be I went wrong here, I didn't have an option for warm, cool etc when taking measurements but I had the option of the kelvin number like 6000, 6500 etc - about 6 of them and so I did all those. And the results had 4 diff measurement in each box, not like the tutorial showed 2. Please advise!! Thank you so much!!
Damien Symonds Posted August 21, 2017 Posted August 21, 2017 Hi Perli, are you calibrating a laptop screen, or a desktop one?
Perli halpern Posted August 21, 2017 Author Posted August 21, 2017 A dell desktop connected to my Hp laptop
Damien Symonds Posted August 21, 2017 Posted August 21, 2017 Terrific. Quote Side note, could be I went wrong here, I didn't have an option for warm, cool etc when taking measurements but I had the option of the kelvin number like 6000, 6500 etc - about 6 of them and so I did all those. Yep, that's perfect. Which one did you end up choosing? Quote And the results had 4 diff measurement in each box, not like the tutorial showed 2 Yes, that's new. Just concentrate on the top number - the highest one. Which lab are your prints from?
Perli halpern Posted August 21, 2017 Author Posted August 21, 2017 Ok amazing so I have gone right so far - wrote down top numbers. And chose 6500 but now redid it with 7000 and reduced brightness to 80. But still not happy, far too much can't pink in the skin compared to print! I am currently in israel for 6 weeks so printing here in Israel. Once I go back to England i willl have to find a lab and re calibrate !!!
Damien Symonds Posted August 21, 2017 Posted August 21, 2017 Can you confirm that your print files are in the correct colour space?
Perli halpern Posted August 21, 2017 Author Posted August 21, 2017 I'm 99.99 percent sure ? How do I check?
Damien Symonds Posted August 21, 2017 Posted August 21, 2017 Perfect. Is the pink problem only evident in skin? How about in grey areas?
Perli halpern Posted August 22, 2017 Author Posted August 22, 2017 Now that you are mentioning grey, YES!
Damien Symonds Posted August 22, 2017 Posted August 22, 2017 Bummer. What about when you calibrate the laptop screen? Does the problem exist there too? (I'm trying to ascertain if the calibrator is faulty.)
Damien Symonds Posted August 22, 2017 Posted August 22, 2017 Give it a shot, and let me know. Remember there will be different instructions to follow.
Perli halpern Posted August 22, 2017 Author Posted August 22, 2017 right! ok ill give it a try and keep you posted! 1
Perli halpern Posted August 22, 2017 Author Posted August 22, 2017 Ok. Calibrated my laptop and it is definitely better than the screen. it was quite bright so i reduced the brightness and could still reduce some more but the coloring is way more correct! What could it be with the screen?? not cooling down? Also, with the laptop when re-calibrating to troubleshoot do i reduce the luminance on the first page by the display settings or only when it starts the measurements and shows the green line (i did it by the measuring green line...) I really appreciate your help - this is so stressful hope we get there!!!!
Damien Symonds Posted August 22, 2017 Posted August 22, 2017 On the first page, the luminance target. https://www.damiensymonds.net/wp-content/uploads/2015/12/08i1dp08.gif
Perli halpern Posted August 22, 2017 Author Posted August 22, 2017 ok ill do it again like that - with the desktop am i also supposed to do it like that? What do you reccomend about the desktop colour now?
Damien Symonds Posted August 22, 2017 Posted August 22, 2017 36 minutes ago, Perli halpern said: Ok. Calibrated my laptop and it is definitely better than the screen. it was quite bright so i reduced the brightness and could still reduce some more but the coloring is way more correct! What could it be with the screen?? not cooling down? You might need to try Method 2, if you haven't already done so.
Perli halpern Posted August 22, 2017 Author Posted August 22, 2017 ok trying method 2 now, till now i was set on white led, in the instructions its showing now to select ccfl, is that correct?
Damien Symonds Posted August 22, 2017 Posted August 22, 2017 No, choose what is appropriate for your screen. White LED is most likely correct, unless your screen is an older model?
Perli halpern Posted August 22, 2017 Author Posted August 22, 2017 Ok great doing that now - it's not old my screen.
Damien Symonds Posted August 22, 2017 Posted August 22, 2017 May I have a link to the specs of your screen?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now