i1DP-Mac-11

[Damien Symonds]

< Go back to the previous step    << Go back to the beginning

Part 4: Lights out

At this point, if you haven’t already, turn off the lights or pull the blinds, or whatever. Strictly speaking, the surrounding light shouldn’t matter, but it can’t hurt to be extra safe.

Part 5: Calibration

The software will guide you through the next couple of steps. It will tell you to turn the device’s cover around, tilt your screen back, and position the device carefully on the screen.

Once you’ve followed the instructions, and pressed “Next” a couple of times, you’ll get to this screen:

The instructions here are poorly-written, but logic will guide you.

Step 1 tells you to hang your device on the screen, which you should have already done, and press Next, which you shouldn’t do until after steps 2 and 3, of course.

Step 2 doesn’t apply to your screen, so ignore it.

Step 3 lets you tell the program what controls your screen has.  Your screen only has Brightness control, so that's the only one you choose.

Brightness adjustment >>