i1Studio-PC20

[Damien Symonds]

< Go back to the previous step    << Go back to the beginning

Start calibrating again

As before, make sure your two checkboxes are the same as mine circled here - ADC off, "Adjust manually" on:

Then press the "Start Measurement Process" button in the bottom right corner.

On this screen, make sure all three boxes are still checked:

Hang your device over the screen as instructed.  Then press Next again.

LIGHTS OUT!

At this point, if you haven’t already, turn off the lights or pull the blinds, or whatever.

Reading the colours

The device will take a moment to take a reading of your screen's contrast.  I've never been required to do anything while this is occurring (please comment below if your experience is different).

Then it will read your screen's white temperature, and stop here:

Fine-tune >>