Xelite-14

[Damien Symonds]

< Go back to the previous step    << Go back to the beginning

Lights out

At this point, if you haven’t already, turn off the lights or pull the blinds, or whatever. You don’t need your calibration compromised by light sneaking in, so for your safest result, make your room as dark as possible.

Place the Spyder

Lengthen the cord, unclip the cover, then position the device as instructed:

No need to be too stressed about the position on the screen.  You don't need to be exactly in the outline given, just be generally in that area.

But it IS important for the device to be sitting perfectly flat on the screen.  Don't let any light leak in at the sides.  Tilt your screen back to ensure this.

Click “Next” to begin the calibration process.

Colours >>